Written by
Tamatha Hazen
Edited by
Kristen Cramer
Fact-checked by
Tom Grupa
Baseboard heating cost
Baseboard heating costs$300 to $1,100 per unitwith installation, depending on if the system is electric or hydronic. Installing baseboard heat costs$5,400 to $7,800for 18 to 26 units to heat a home. Electric baseboard heat costs$480 to $900 per monthto run on average.
| Home size (square feet) | Units needed* | Total cost to install |
|---|---|---|
| 1,000 – 1,400 | 10 – 14 | $3,000 – $4,200 |
| 1,400 – 1,800 | 14 – 18 | $4,200 – $5,400 |
| 1,800 – 2,200 | 18 – 22 | $5,400 – $6,600 |
| 2,200 – 2,600 | 22 – 26 | $6,600 – $7,800 |
| 2,600 – 3,200 | 26 – 32 | $7,800 – $9,600 |
*Installing 4-foot 1,000-watt heaters
Get free estimates from electricians near you.
Search
Electric baseboard heat cost calculator
The following table shows the average cost per unit to install electric baseboard heaters.
| National average cost | $800 |
| Minimum cost | $200 |
| Maximum cost | $3,000 |
| Average cost range | $300 to $1,100 |
*Cost data is from research and project costs reported by HomeGuide members.
Cost to install baseboard heating system by type
A baseboard heating system costs$200 to $1,300per unitwith installation. Heaters are placed along the baseboards, walls, and under-cabinet toe spaces to release ground-level heat, which rises to warm the space.
| Type | Average cost to install (per unit) |
|---|---|
| Electric baseboard heater | $200 – $1,100 |
| Hydronic baseboard heater (water or oil) | $430 – $1,200 |
| Wall heater | $370 – $1,200 |
| Toe kick | $420 – $1,300 |
Electric baseboard heater installation cost
An electric baseboard heater costs$200 to $1,100with installation or$50 to $130for the unit alone. Electric heaters require no ductwork or plumbing, so installation is cheaper and easier than other heating systems. Electric units draw in cool air and heat it with electric coils.
Hydronic baseboard heater cost
A hydronic baseboard heater costs$430 to $1,200with installation or$180 to $320for the unit alone. Hydronic models circulate hot liquid from an internal reservoir or the home's boiler to provide radiant heat. Hydronic units heat slowly but stay warm long after the running cycle for more efficient heating.
Baseboard vs. wall heater costs
An electric wall heater costs$370 to $1,200 per unitwith installation, depending on if the unit is surface-mounted or recessed in an interior wall. A wall heater provides fast, even heat by using a fan to circulate air. Wall heaters are ideal for bathrooms, workshops, and other small spaces.
| Factors | Electric baseboard heater | Electric wall heater |
|---|---|---|
| Unit cost | $50 – $130 | $100 – $500 |
| Installed cost (per unit) | $200 – $1,100 | $370 – $1,200 |
| Time to heat | 30 – 60 minutes to heat a room | Less than 10 minutes to heat a room |
| Lifespan | 20 years or more | 8 to 12 years |
| Temperatures | Operates at lower temperatures and is cooler to the touch than a wall heater | Operates at higher temperatures than baseboard a heater |
| Space required | 6 – 8 feet of length and less than 12 inches in height | 12 –16 inches length and height |
| Noise | Nearly silent; a good choice for bedrooms | Audible fan noise, but less than a standard home refrigerator |
Toe kick heater installation cost
A toe kick heater costs$420 to $1,300with installation or$175 to $430for the unit alone. Toe kick heaters are space-saving and typically located under cabinets, vanities, and stairways to provide supplemental floor-level heat when needed. Electric and hydronic models are available.
Cost factors to replace electric baseboard heating
Factors that impact the cost include:
Home size – Larger homes require multiple heater units, increasing costs.
Number of units – Large rooms may require more than one heater to warm the space adequately. Some electricians offer a discount to install multiple units.
Heater quality – Basic, budget-friendly units start at $50, while high-end heaters with smart controls and improved safety features cost $250+.
Brand – King and Cadet offer heaters in multiple price ranges. Stelpro and Fahrenheat are high-priced units with more features and better energy efficiency.
Watts – Electric heat capacity is measured in watts; the more watts, the more expensive the heater.
Adding a zone – Installing an electric baseboard heater for supplemental zoned heating costs less than replacing the entire hot water central heating system.
Thermostat installation costs $140 to $350 for a basic model or $270 to $450 for a smart thermostat. A smart thermostat pays for itself over time with improved energy consumption.
Hiring an electrician costs $50 to $130 per hourto add a dedicated circuit for the heater. A 240-volt heater is more energy-efficient but costs more to install since a dedicated circuit is required.
Hiring an HVAC contractor costs$75 to $150 per hourfor labor to install baseboard heaters. Labor costs increase for complex installations, confined spaces, or older homes.
Warranty – Premium brands offer a longer warranty of 5 to 10 years, while cheaper brands have limited warranties of 1 to 3 years.
Permits – Renovations that alter the structure or extend an electrical, plumbing, or HVAC system require a permit. Contractors typically include permit costs in the installation estimate.
Seasonal rates – Some companies offer discounts for heater installation during the off-season.
Baseboard heater prices by watts
Baseboard heaters range in length from2 to 6 feetand typically produce250 wattsper linear foot. A 1,500-watt heater warms a 150 square foot room. Bigger spaces require a larger watt size or multiple units for adequate heating.
| Watts | Price range per unit* |
|---|---|
| Up to 500 | $35 – $250 |
| 750 | $40 – $300 |
| 1,000 | $60 – $350 |
| 1,500 | $70 – $400 |
| 2,000 | $100 – $480 |
| > 2,500 | $130 – $700+ |
*Not including installation.
Get free estimates from electricians near you.
Search
When selecting heaters based on watt size, consider that two smaller heaters may provide more balanced heat in a large space than one large heater.
Baseboard heat cost per month to run
Baseboard heat costs$480 to $900 per monthto run for 10 hours per day, depending on the home size. In larger homes, regions with high utility costs, or colder climates where heaters run more often, baseboard heating costs$1,500+ per month.
Baseboard heaters energy usage
A well-insulated room requires10 watts per square footof space, while a poorly-insulated older home needs up to15 watts per square foot.
| Room Area | Watts required | Daily energy use* |
|---|---|---|
| 100 sq. ft. | 1,000 | 10 kWh |
| 150 sq. ft. | 1,500 | 15 kWh |
| 300 sq. ft. | 3,000 | 30 kWh |
| 400 sq. ft. | 4,000 | 40 kWh |
| 500 sq. ft. | 5,000 | 50 kWh |
*Based on 10 hours per day of use.
Use the following formula to calculate the cost per month to run baseboard heaters:
Power (Watts) x Price Of Electricity ($ per kWh) ÷ 1,000 = Heating costs per hour
Is baseboard heating expensive?
An electric baseboard heater is one of the most expensive ways to warm a home, according to theU.S. Department of Energy. Electric baseboard heating costs more than other fuel sources, including propane, oil, or natural gas. However, baseboard heaters are cost-effective for secondary zoned heating.
Baseboard heating vs. alternative systems costs
Baseboard heating provides low upfront costs to homeowners with a limited budget. However, the high running costs make baseboard heat impractical as the primary heat source in most homes.
The following table shows alternative heating systems and prices:
| Heating system | Average cost to install (per unit/zone) |
|---|---|
| Cove heaters / radiant panels | $200 – $1,000 |
| Radiator heater cost | $700 – $1,300 |
| Radiant floor heating | $2,100 – $6,400 |
| Forced-air furnace cost | $2,000 – $5,400 |
| Ductless mini-split cost | $2,000 – $6,000 |
| Heat pump cost | $2,800 – $8,200 |
| Geothermal heat pump cost | $15,000 – $35,000 |
| Space heater | $30 – $300 |
Get free estimates from electricians near you.
Search
How much does it cost to convert baseboard heating to forced air?
Converting baseboard heating to a forced-air system byinstalling a new furnace and ductwork costs$3,400 to $11,000. A forced-air system uses air ducts and vents to circulate temperature-controlled air throughout the home. Conversion costs decrease for homes with existing ductwork.
Baseboard heater FAQs
What is baseboard heating?
Baseboard heaters are slim, metal heaters placed at baseboard level to create zoned heating without ductwork. They release ground-level heat, which rises to warm the space. Electric units heat the cold air with a heating element. Hydronic units heat oil or water from inside the unit or a connected boiler.
Who installs electric baseboard heaters?
An HVAC specialist installs electric baseboard heaters. Hire an electrician if wiring or outlet modifications are needed.
How much baseboard heat do I need?
The amount of baseboard heat needed depends on the home's age, room sizes, regional climate, and whether the home is properly insulated.
Follow these guidelines:
Approximately 10 watts per square foot of electric heat are needed.
Newly constructed homes have reduced heat requirements of 5 to 8 watts per square foot.
Older or poorly-insulated homes have increased heat requirements of 12 to 15 watts per square foot.
Due to lower heat requirements, homes in southern climates sometimes rely on baseboard heat as a primary heat source.
Homes in extreme winter climates typically use baseboard heat as a secondary heat source to provide zoned heating for added comfort in the coldest rooms.
How long do baseboard heaters last?
Baseboard heaters last20 years or moreif cleaned regularly.
Is baseboard heating bad?
Baseboard heaters provide quiet, zoned heating with no ductwork required. They are cheap to install but expensive to run. Baseboard heaters pose a burn risk and should be used with caution in homes with small children.
Tips to keep baseboard heaters running properly and safely:
Position the heater under a window for more efficient heating.
Clean regularly to achieve maximum heat efficiency.
Do not block the heater with furniture, as proper airflow is necessary for optimum heating.
Curtains or drapes should be a minimum of 6 to 12 inches away to reduce fire risks.
Add a programable or smart thermostat for better heat control and energy savings.
Are electric or hydronic baseboard heaters best for me?
When deciding between electric or hydronic baseboard heaters, consider the following advantages and disadvantages of each system.
| Baseboard heater type | Pros | Cons |
|---|---|---|
| Electric |
|
|
| Hydronic |
|
|
Finding and hiring a baseboard heat installer
Whenhiring an electricianor HVAC specialist for a baseboard heater installation, be sure to:
Get at least three estimates that include comparable equipment to compare.
Look for licensed contractors with experience installing baseboard heating units.
Read their reviews on HomeGuide and Google.
Select insured and bonded companies that have been in business for 5+ years.
Avoid selecting the lowest quote as quality may suffer.
Get a detailed estimate, contract, and warranty in writing before the work begins.
Never pay in full before the project starts. Follow a payment plan instead for work completed.
Questions to ask
What baseboard heater type and brand is included in the estimate?
Is the hydronic heater self-contained, or will it connect to my boiler or water heater?
How long will the installation take?
Do you charge an hourly or flat-rate fee to install a baseboard heater?
Are you licensed, bonded, and insured?
How many baseboard heater installations have you completed in the last year?
May I have a copy of your insurance policy for my records?
Can you provide a list of references with contact information?
Do you guarantee your work or offer an extended warranty?
