Musibaby M68 Pairing Instructions (2025)

FAQs

Musibaby M68 Pairing Instructions? ›

1) Turn off the Bluetooth function of your phone or bluetooth device first. 2) Then turn on two speakers at the same time. 4) Turn on the Bluetooth function of your phone or bluetooth device, you will find only one Bluetooth named “MusiBaby M68” , Click connect will be OK.

1) Turn off the Bluetooth function of your phone or bluetooth device first. 2) Then turn on two speakers at the same time. 4) Turn on the Bluetooth function of your phone or bluetooth device, you will find only one Bluetooth named “MusiBaby M68” , Click connect will be OK.

Locate the reset button or buttons and press and hold it for a few seconds. The duration may vary depending on the brand and model of your Bluetoothspeaker, but around 10 seconds is typically sufficient. Keep in mind that you may need to use a pin or a small tool to press the reset button if it is recessed.

Pairing Your Device and Speaker

Ensure your speaker is in pairing mode (usually denoted by a flashing light), and select your speaker from the list of available Bluetooth devices. The devices will then hold a little digital handshake, and voila! You've successfully paired your device.

If your Bluetooth devices won't connect, it's likely because the devices are out of range, or aren't in pairing mode. If you're having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet "forget" the connection.

To enter Party Mode, simultaneously press and hold the volume and Bluetooth buttons on the first speaker until you hear a voice prompt. Repeat this process on the second speaker until you hear a tone play. After around 10 seconds, the two speakers should say “Party Mode” to confirm the audio is playing in unison.

Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly. It is necessary to pair BLUETOOTH devices to establish a BLUETOOTH connection.

If the speaker cannot be turned on, or if it cannot be operated even when it is turned on, push the RESET button with a pointed object such as a pin. The speaker is reset and turns off.

Turn Bluetooth on and off: Select Start , then select Settings > Devices > Bluetooth & other devices . Turn off Bluetooth, wait a few seconds, then turn it back on. Remove the Bluetooth device, then add it again: Select Start , then select Settings > Devices > Bluetooth & other devices ..

How do you put a Bluetooth speaker into pairing mode? ›

For most speakers, quickly press and release the speaker's BT button. However, with some speakers you may have to press and hold the BT button for a few seconds. Most speakers make a noise or have a blinking LED to let you know they are in pairing mode.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.” A passkey may be called “Passcode”, “PIN code”, “PIN number” or “Password.”

Press the Bluetooth button for at least 3-5 seconds until it begins flashing white. Double-press the Bluetooth button to begin pairing to the primary speaker. Allow 2-5 seconds for the speakers to connect. Once the Bluetooth light turns solid white, the speaker is successfully connected.